TotalHeal CampusGrid - 2026 Pricing, Features, Reviews & Alternatives

TotalHeal CampusGrid. Your switches, access points and controllers in one place: every port, what is plugged in where, PoE draw, and port profiles applied with each vendor’s own commands.

The problem: Switches are configured port by port over SSH, by whoever has the password; nobody knows which port the conference-room phone is on, how much PoE is left, or which firmware each switch runs, and a typo on one port is found weeks later.

How it works: CampusGrid reads every switch, access point and controller over SNMP from a TotalHeal agent at the site, and applies port profiles over SSH as the commands an engineer would type for that vendor — shown before they are sent, with the switch’s answer kept.

- Every port: Model, firmware, uptime, and for each port its state, speed, VLAN, errors and PoE, read every minute over SNMP v2c.

- What is plugged in where: The topology from LLDP: which switch and port each neighbour is on.

- Port profiles: Access VLAN, voice VLAN for phones, PoE on or off, 802.1X with MAB through NetworkGate, a description, shut down — applied to ticked ports as Cisco IOS / IOS-XE, Aruba AOS-CX or Juniper Junos commands.

- Nothing hidden: The exact commands are shown before they are sent; the switch’s answer is kept; a refused command fails the change; the switch’s SSH key is pinned on first use.

- Wi-Fi: On the Professional tier, clients per wireless network and per access point from NetworkGate sign-ins.

- Four-eyes: On the Elite tier every switch change waits for a second administrator.

Deployment: SaaS, On-premises control plane and Air-gapped.

Made in India by Freaquer Corporation Private Limited, Noida.